Publications

Showing 101 - 125 of 1990 results
The following steps are recommended if you wish to appeal against an Inspector's Order issued to you by an Inspector (Electricity). Step one Contact the issuing inspector to clarify the issue...
EnergySafety
Information
21 Jan 2019
Building and Energy, in conjunction with WorkSafe, has published new guidelines for safe management of high voltage electrical installations.
EnergySafety
Technical standards
21 Jan 2019
This document aims to assist people designated or applying to be designated as an Inspector (Electricity). It provides information on the categories of designation, the power and limitations of an Inspector (Electricity) under the Energy Coordination Act 1994 , and the standard of conduct that an Inspector (Electricity) is expected to maintain when carrying out their duties.
EnergySafety
Code of practice
21 Jan 2019
This document aims to assist people designated or planning to be designated as an inspector (gas). It provides information on the designation; the powers and limitations of an inspector (gas) under the Energy Coordination Act 1994; and the principles and practices that an inspector (gas) is expected to follow when carrying out their duties.
EnergySafety
Code of practice
21 Jan 2019
New WAER 2015 for installation designs commenced after 1 January 2016.
EnergySafety
Technical standards
21 Jan 2019
Who should complete this form This form can be used by any individual that holds, or is involved with, occupational licence/s issued by the Commissioner for Consumer Protection to notify of a change...
Consumer Protection
Form – notification
18 Jan 2019
Application for a registration as a real estate & business sales representative (do not use to remove property management condition). Who needs to apply for registration Any individuals wishing...
Consumer Protection
Form – registration
17 Jan 2019
The iRentWA flyer is a customisable flyer for real estate and rental agents to use to promote their business and Consumer Protection's smartphone app iRentWA to their clients. How to use the flyer...
Consumer Protection
Flyers
16 Jan 2019
These guidelines have been developed and issued by the Director of Energy Safety, Building and Energy Division of the Department of Mines, Industry Regulation and Safety Western Australia.
EnergySafety
Guide / handbook
15 Jan 2019
Battery Energy Storage Systems (BESS) are being installed in increasing numbers in electricity distribution networks, homes, remote area power supplies and commercial/industrial installations...
EnergySafety
Guide / handbook
15 Jan 2019
General It is a requirement of Regulation 45(1) of the Electricity (Licensing) Regulations 1991 that an electrical contractor shall ensure that his/her electrical contractor’s licence number appears...
EnergySafety
Information
15 Jan 2019
This application form is used to advise Building and Energy of a lost or stolen gasfitting permit or gasfitting authorisation and apply for a replacement card.
EnergySafety
Form – application
15 Jan 2019
This application form is used to notify Building and Energy of a change of name to your gasfitting permit or gasfitting authorisation.
EnergySafety
Form – application
15 Jan 2019
This application form is used to apply for a Class P gasfitting permit.
EnergySafety
Form – application
11 Jan 2019
This application form is used to apply for a Class E gasfitting permit.
EnergySafety
Form – application
09 Jan 2019
This application form is suitable for a person who wishes to upgrade an Installing NG and LPG permit to include as servicing, or to upgrade a Gas Servicing Only permit to include installing NG and...
EnergySafety
Form – application
09 Jan 2019
This form is suitable for a Western Australian indentured apprentice or a non-apprentice (trainee) or tradesperson working under supervision.
EnergySafety
Form – notification
09 Jan 2019
This application form is suitable for a Western Australian indentured apprentice or non-apprentice (trainee) who has completed either a plumbing apprenticeship or a Certificate III in gasfitting plus...
EnergySafety
Form – application
09 Jan 2019
This application form is suitable for a Western Australian indentured apprentice or a non-apprentice (trainee) who has not completed either the on-the-job training and/or Toolbox session. To be...
EnergySafety
Form – application
09 Jan 2019
Consumer Protection (CP) Western Australia’s Facebook page is managed by the CP Media team. We’re real people, not bots, so please be nice to us. By using or accessing our page, you’re agreeing to...
Consumer Protection
Information
09 Jan 2019
Current Building and Energy fee schedule for electrical and gas licensing.
EnergySafety
Information
09 Jan 2019
This application form is suitable for a Western Australian indentured apprentice or a non-apprentice (trainee) wishing to work under supervision. To be issued a Gasfitting Permit in Western Australia...
EnergySafety
Form – application
08 Jan 2019
To be issued a Gasfitting Permit in Western Australia, a person must be able to demonstrate various requirements to the Director of Energy Safety, one of which includes demonstrating practical skills...
EnergySafety
Information
07 Jan 2019
This authorisation form once duly signed, enables employee electricians to complete electrical safety certificates on behalf of the electrical contractor. Note: copies remain the property of the...
EnergySafety
Form – notification
07 Jan 2019
These application forms are used to apply to commence training for a restricted electrical licence.
EnergySafety
Form – application
04 Jan 2019

Pages