Publications

Showing 1 - 25 of 125 results
Important points about LP Gas cylinders, and a list of Standards Australia certified gas cylinder test stations in Western Australia.
EnergySafety
Information
21 May 2018
Battery Energy Storage Systems (BESS) are being installed in increasing numbers in electricity distribution networks, homes, remote area power supplies and commercial/industrial installations...
EnergySafety
Guide / handbook
09 May 2018
General It is a requirement of Regulation 45(1) of the Electricity (Licensing) Regulations 1991 that an electrical contractor shall ensure that his/her electrical contractor’s licence number appears...
EnergySafety
Information
03 May 2018
This application form is suitable for an applicant who has previously held a Western Australian Gasfitting permit expired over 30 days and up to two years.
EnergySafety
Form – application
16 Apr 2018
Energy Safety has developed this Code of Practice for Persons working on or near energised electrical installations (the Code). The Code commences on the day the Electricity (Licensing) Amendment...
EnergySafety
Code of practice
16 Apr 2018
This application is to be used for applicants undertaking training as a pre-apprentice.
EnergySafety
Form – application
27 Mar 2018
This application form is suitable for a Western Australian indentured apprentice or a non-apprentice (trainee) who has not completed either the on-the-job training and/or Toolbox session. To be...
EnergySafety
Form – application
22 Mar 2018
This application form is suitable for a Western Australian indentured apprentice or a non-apprentice (trainee) wishing to work under supervision. To be issued a Gasfitting Permit in Western Australia...
EnergySafety
Form – application
22 Mar 2018
To be issued a Gasfitting Permit in Western Australia, a person must be able to demonstrate various requirements to the Director of Energy Safety, one of which includes demonstrating practical skills...
EnergySafety
Information
22 Mar 2018
Energy Bulletins provide electrical and gas technical and safety information, including details of new and amended legislation and standards. Energy Bulletins are of particular interest to electrical...
EnergySafety
Bulletin
15 Feb 2018
To apply for an electrician's training licence, you will need to read the guidelines and complete the test. A pass mark of 80% is required to successfully pass the test and then you will need to...
EnergySafety
Form – notification
01 Feb 2018
This form is suitable for a Western Australian indentured apprentice or a non-apprentice (trainee) or tradesperson working under supervision.
EnergySafety
Form – notification
01 Feb 2018
This application form is suitable for a Western Australian indentured apprentice or non-apprentice (trainee) who has completed either a plumbing apprenticeship or a Certificate III in gasfitting plus...
EnergySafety
Form – application
01 Feb 2018
This application form is used to convert your certificate of compentency to a gasfitting permit. Fact sheet - gasfitting certificate of competency to permit This fact sheet explains what your...
EnergySafety
Form – application
01 Feb 2018
This application form is suitable for a person who wishes to upgrade an Installing NG and LPG permit to include as servicing, or to upgrade a Gas Servicing Only permit to include installing NG and...
EnergySafety
Form – application
01 Feb 2018
Gas Service Logbook for industrial and commercial gas installations, not subject to a “Gasfitting Authorisation”.
EnergySafety
Information
09 Jan 2018
Gasfitting Record Book for industrial and commercial gas installations, subject to a “Gasfitting Authorisation”.
EnergySafety
Information
09 Jan 2018
This brochure is designed to advise builders, gas fitters and consumers where gas-fired barbecues and patio heaters may be installed and used safely. This information does not take precedence over...
EnergySafety
Brochure
15 Dec 2017
This application form is used to apply for a gasfitting authorisation.
EnergySafety
Form – application
30 Nov 2017
This application form is used to apply for a Class E gasfitting permit.
EnergySafety
Form – application
01 Sep 2017
This application form is used to apply for a Class I gasfitting permit.
EnergySafety
Form – application
01 Sep 2017
This application form is used to apply for a Class P gasfitting permit.
EnergySafety
Form – application
01 Sep 2017
This application form is to register as a nominee for an electrical contractor's or in-house installing work licence.
EnergySafety
Form – application
13 Jul 2017
This application form is used to register as a management representative for an electrical contractor's licence.
EnergySafety
Form – application
13 Jul 2017
These guidelines have been developed and issued by the Director of Energy Safety, EnergySafety Division of the Department of Mines, Industry Regulation and Safety Western Australia.
EnergySafety
Guide / handbook
29 Jun 2017

Pages