Publications

Showing 51 - 75 of 121 results
The following steps are recommended if you wish to appeal against an Inspector's Order issued to you by an Inspector (Electricity). Step one Contact the issuing inspector to clarify the issue...
EnergySafety
Information
30 Apr 2015
In April 2014, Energy Safety published Guidelines for the safe management of high voltage electrical installations. The purpose of the document was to provide advice to ‘responsible persons’ for...
EnergySafety
Fact sheet
30 Apr 2015
This application form is for an electrician's licence to carry out electrical fitting work only for overseas applicants who have been issued an Australian recognised trade certificate (ARTC) endorsed electrical fitter.
EnergySafety
Form – application
14 Apr 2015
A summary of statistical information about electrical incidents in Western Australia.
EnergySafety
Reports
07 Apr 2015
This application form is used to apply for a variable speed drives permit.
EnergySafety
Form – application
18 Feb 2015
This application form is used to apply for a medical imaging equipment permit.
EnergySafety
Form – application
04 Feb 2015
Make sure you use a licensed electrical contractor whenever you have electrical work done. Is your electrical contractor licensed? Make sure you use a licensed electrical contractor whenever you have...
EnergySafety
Brochure
09 Jan 2015
This application form is used to apply for a university technician's electrical worker's permit.
EnergySafety
Form – application
10 Dec 2014
Private overhead power lines Power lines which transport electricity from your main switchboard and meter to your home or other buildings are private power lines. This includes the pole where the...
EnergySafety
Brochure
17 Sep 2014
Business plans for the Energy Safety d ivision of the Department of Commerce.
EnergySafety
Plans
22 Aug 2014
This application form is for an electrician's licence on completion of an apprenticeship in Western Australia. Fact sheet - Obtaining an electrician's licence on completion of an apprenticeship This...
EnergySafety
Form – application
07 Aug 2014
This application form is used to apply to upgrade your Class G gasfitting permit to include installing and servicing of NG and LPG.
EnergySafety
Form – application
08 Jul 2014
LP Gas is safe if handled correctly... If you own or hire LP Gas cylinders, you should be aware of the basic properties of the gas as well as safe handling and operating principles. There is no...
EnergySafety
Brochure
02 Jul 2014
General It is a requirement of Regulation 45(1) of the Electricity (Licensing) Regulations 1991 that an electrical contractor shall ensure that his/her electrical contractor’s licence number appears...
EnergySafety
Information
02 Jul 2014
Working live is dangerous for electricians at your workplace.
EnergySafety
Code of practice
13 Jun 2014
Wood Pole Order 01-2009 issued to Western Power under Section 18B of the Energy Coordination Act 1994.
EnergySafety
Reports
12 Jun 2014
This application form for an electrician's licence is for overseas applicants issued an Australian recognised trade certificate (ARTC) endorsed electrical mechanic.
EnergySafety
Form – application
05 Jun 2014
An amended version of the requirements was issued in 2014.
EnergySafety
Information
05 Jun 2014
Escalation in demand for solar photo-voltaic (PV) systems underpins a need to ensure and monitor that solar PV installations are being properly installed.
EnergySafety
Reports
03 Jun 2014
A compliance assessment (audit) to identify the degree to which the asset management systems and practices employed by Western Power that affected the strength and structural adequacy of its wood poles in 2005 comply with the Electricity (Supply Standards and Systems Safety) Regulations 2001.
EnergySafety
Reports
03 Jun 2014
Energy Safety carried out an investigation into the cause of the fire in Toodyay and determined that the cause of the fire was a fallen pole that ignited ground stubble. Please click the following...
EnergySafety
Reports
03 Jun 2014
A wild fire occurred near Parryville on 7 March 2007. Energy Safety carried out an investigation into the cause of the fire and determined that the fire started when a 22 kV conductor clashed with an...
EnergySafety
Reports
03 Jun 2014
When was the last time you checked your LP Gas installation to ensure it was safe and complies?
EnergySafety
Brochure
30 May 2014
This booklet covers, in general terms, basic electrical safety practices.
EnergySafety
Guide / handbook
20 May 2014
This booklet provides advice on how safety can be achieved and maintained by every electrical worker.
EnergySafety
Guide / handbook
20 May 2014

Pages