Publications

Showing 401 - 425 of 512 results
This guide provides practical guidance for designers, manufacturers, suppliers, couriers and users of surgical instrument set transport cases, and outlines their obligations when transporting and...
WorkSafe
Guide / handbook
21 May 2014
By understanding the processes that make drivers tired, they are better able to plan and manage their daily routines to minimise the risk of fatigue. This handbook suggests lifestyle changes and other steps that professional drivers should consider to help them manage their fatigue.
WorkSafe
Alert
21 May 2014
This handbook outlines the legal requirements and provide known industry solutions and strategies to ensure the safe operation of tractors with attached implements on farms.
WorkSafe
Guide / handbook
21 May 2014
This information has been produced jointly between the Training Accreditation Council, WorkSafe and the Department of Education and Training (DET). It provides information about the transition...
WorkSafe
Information
21 May 2014
This bulletin has been produced to provide guidance for community groups on occupational safety and health in relation to migrant workers.
WorkSafe
Guide / handbook
21 May 2014
This guide outlines a range of work practices and principles of work place design that, when used in combination can significantly reduce the incidence and severity of armed robbery.
WorkSafe
Guide / handbook
21 May 2014
This guide provides practical guidance for designers, manufacturers, suppliers and users of slashers. OHS legislation requires the control of risk to health and safety, and following this guide is a...
WorkSafe
Guide / handbook
21 May 2014
This guide covers the design, manufacture, supply and safe use of a front end loader (FEL), and its ancillary attachments, on a tractor. It also covers used front end loaders, and their attachments for resale.
WorkSafe
Guide / handbook
21 May 2014
The WorkSafe Plan is for organisations with workplaces under the jurisdiction of Western Australian safety and health legislation. The WorkSafe Plan may be used as a management tool for organisations outside the jurisdiction of WorkSafe, but those organisations are not eligible for Certificates of Achievement issued by the Department of Commerce, WorkSafe Division. This guide is for use by assessors and others who are familiar with how to conduct a workplace assessment and apply the WorkSafe Plan rating method.
WorkSafe
Guide / handbook
21 May 2014
This film will show you how to identify hazardous manual tasks, how to assess risks arising from hazardous manual tasks, and how to control the risk. Running time: 11:32 mins
WorkSafe
Training material
21 May 2014
This handbook aims to assist franchisors develop an effective health and safety system and help franchisees understand how to implement this system in their workplace.
WorkSafe
Guide / handbook
21 May 2014
Directory of Restricted Asbestos Licence Training Providers registered with WorkSafe to deliver the Restricted Asbestos Training Course
WorkSafe
Directory
21 May 2014
This bulletin has been produced to provide guidance for employers in managing the occupational safety and health of migrant workers.
WorkSafe
Guide / handbook
21 May 2014
Tips for carers on preventing musculoskeletal injuries from performing manual tasks.
WorkSafe
Guide / handbook
21 May 2014
This bulletin has been produced to raise awareness on occupational safety and health issues relevant to older workers. Employers have a general duty of care to address potential age-related factors...
WorkSafe
Guide / handbook
21 May 2014
This fact sheet contains information on preventing and managing psychological health for small businesses in relation to their duty of care under the Occupational Health and Safety Act 198 4.
WorkSafe
Fact sheet
21 May 2014
The purpose of this code of practice is to provide advice on the preparation of Material Safety Data Sheets (MSDS) where required by legislation. The aim is to provide consistent health and safety advice to persons who could be exposed to hazardous substances and Dangerous Goods.
WorkSafe
Code of practice
21 May 2014
This code of practice aims to provide practical guidance for public sector agencies to achieve compliance with the obligations of the Occupational Safety and Health Act 1984 and the Occupational Safety and Health Regulations 1996. This code also promotes the role of occupational safety and health (OSH) management systems and the importance of chief executive officer leadership in improving OSH performance. It acknowledges that an effective OSH management system is a critical component of an agency’s overall risk management program.
WorkSafe
Code of practice
21 May 2014
This code of practice applies to venues, where employees or the self-employed are present, where live (whether amplified or not) or recorded music is being played for entertainment purposes at levels which are likely to exceed the exposure standard for noise.
WorkSafe
Code of practice
21 May 2014
This code of practice applies to all workplaces in Western Australia covered by the Occupational Safety and Health Act 1984 where excessive noise may exist. This code provides practical guidance for the management of noise which may be damaging to the hearing of people in workplaces. The approved code of practice Control of Noise in the Music Entertainment Industry provides additional information on controlling noise in that industry.
WorkSafe
Code of practice
21 May 2014
The purpose of this national code of practice is to provide practical guidance in the identification of health hazards, evaluation of risks and control of exposure associated with the manufacture of vinyl chloride and its subsequent polymerisation to polyvinyl chloride (PVC). Note that vinyl chloride is often referred to as vinyl chloride monomer (VCM).
WorkSafe
Code of practice
21 May 2014
This code of practice applies to all workplaces in Western Australia covered by the Occupational Safety and Health Act 1984 and provides detailed guidance on the prevention of falls at workplaces.
WorkSafe
Code of practice
21 May 2014
The Ferry and Charter Boat Industry Code of Practice (the Code), provides practical guidance on the safe operation of commercial vessels operating in the ferry and charter boat industry in Western Australia. It is designed to assist those working in the industry to identify, assess and control risks to themselves, colleagues and passengers.
WorkSafe
Code of practice
21 May 2014
This code of practice addresses issues that might potentially arise in some working hours arrangements, for example extended hours, shift work and on call work. It brings together a range of recognised workplace hazard factors that must already be addressed, as far as practicable, where there are occupational safety and health risks. This code of practice is presented as a starting point for undertaking a workplace or industry risk management process to address relevant issues where the working hours arrangements may have occupational safety and health considerations. As individual workplaces and industries have different working hours arrangements, this code of practice provides high level general guidance and recommendations on risk management. It is suggested that the risk management approach is tailored specific to the unique demands of each workplace and/or industry
WorkSafe
Code of practice
21 May 2014
This code of practice applies to all workplaces in Western Australia covered by the Occupational Safety and Health Act and is intended to assist those involved in designing buildings or other structures to meet the requirements of the Occupational Safety and Health Act 1984 and the Occupational Safety and Health Regulations 1996. In particular, this code of practice aims to: explain the legal obligations applicable to a person who is in control of, or who may have influence over, the design of a building or structure; and provide guidelines for ways in which these obligations can be met by providing practical guidance on ways of maximising the safety of the design.
WorkSafe
Code of practice
21 May 2014

Pages