Publications

Showing 1776 - 1800 of 1918 results
This booklet covers, in general terms, basic electrical safety practices.
EnergySafety
Guide / handbook
20 May 2014
This booklet provides advice on how safety can be achieved and maintained by every electrical worker.
EnergySafety
Guide / handbook
20 May 2014
Guidelines for the storage of LP gas cylinders on properties in bushfire prone areas.
EnergySafety
Brochure
20 May 2014
Serious incidents have occurred while workers have been carrying out vegetation control work.
EnergySafety
Brochure
20 May 2014
The purpose of this document is to clarify the responsibilities for controlling and clearing vegetation around overhead power lines.
EnergySafety
Guide / handbook
20 May 2014
When was the last time you checked your LP gas installation? Follow this simple checklist to see if your marine craft is safe and complies with the regulations.
EnergySafety
Brochure
20 May 2014
This application form is for an electrician's licence on completion of the Australian Minimum Context Training Program (gap training), which resulted in the issue of a Certificate III in Electrotechnology Electrician.
EnergySafety
Form – application
20 May 2014
This application form is where the existing legal entity has not changed and the trading name has changed or, the existing legal entity has changed its name and is maintaining the same Australian Company Number (ACN).
EnergySafety
Form – application
20 May 2014
This application form is used where the existing legal entity has not changed and the trading name has changed, or the existing legal entity has changed its name and is maintaining the same Australian Company Number (ACN).
EnergySafety
Form – application
20 May 2014
A bush fire occurred near Brindle Road, Parkerville on 3 January 2008 and the Fire and Emergency Service Authority (FESA) advised Energy Safety at approximately 1700 hours on the same day.
EnergySafety
Reports
20 May 2014
Investigation into the cause of the fire determined that it originated when power lines were able to clash during strong gusty winds.
EnergySafety
Reports
20 May 2014
Investigation into the fire at Location 1478 near Esperance determined that it was caused when a Western Power (the network operator) power pole broke and fell over during high winds.
EnergySafety
Reports
20 May 2014
Investigation into the cause of the fire near Katanning determined that the cause of the fire was a fault on a Western Power (the network operator) overhead power line.
EnergySafety
Reports
20 May 2014
Investigation into the cause of the wild fire in Bridgetown determined that the cause of the fire was a fault on a Western Power (the network operator) overhead power line.
EnergySafety
Reports
20 May 2014
Investigation into the cause of the fire in Tenterden determined that the cause of the fire was a fault or failure of a Western Power (the network operator) overhead power line.
EnergySafety
Reports
20 May 2014
Investigation into the cause of the fire in Gingin determined that the cause of the fire was a fault on a Western Power (the network operator) overhead power line.
EnergySafety
Reports
20 May 2014
This form is used to notify Energy Safety of a lost or stolen electrical worker's licence, permit or certificate of registration and to apply for a replacement.
EnergySafety
Form – application
20 May 2014
Tables 1-3 of this document comprise a ready-reckoner that provides a simple way of working out a worker’s LAeq,8h (eight-hour equivalent continuous sound pressure level) if you know the noise level...
WorkSafe
Information
20 May 2014
This industry safety standard provides practical assistance for designers, manufacturers, suppliers and users of grain augers. Occupational health and safety regulations require the control of risk...
WorkSafe
Guide / handbook
20 May 2014
WorkSafe has produced this document to increase awareness of safety issues faced by your industry and highlight the effect and importance of appropriate systems of work and safety management systems.
WorkSafe
Checklist
20 May 2014
Vehicle spray painting involves the use of hazardous substances (solvents, two-pack paints containing isocyanates). These substances can cause occupational asthma, skin sensitisation/allergic...
WorkSafe
Checklist
20 May 2014
This checklist covers both requirements for hazardous substances under the Occupational Safety and Health Regulations 1996 and general chemical safety.
WorkSafe
Checklist
20 May 2014
This educational article has been developed to assist in the identification of occupational safety and health (OSH) hazards. The hazard identification tools were developed following interviews with...
WorkSafe
Fact sheet
20 May 2014
The Occupational Safety and Health Act 1984 requires employers to provide a safe workplace, to consult with employees and their safety and health representative, and keep them informed about safety...
WorkSafe
Guidance note
20 May 2014
This educational article has been developed to assist in the identification of occupational safety and health (OSH) hazards. The hazard identification tools were developed following interviews with...
WorkSafe
Fact sheet
20 May 2014

Pages