Publications

Showing 1951 - 1975 of 1996 results
Notice and request for consent to encroach or adversely affect
Building Commission
Form – application
14 May 2014
Notice and request for consent (response notice): Protection structures, party walls, removal of fences, access to land
Building Commission
Form – application
14 May 2014
Application to extend a building or demolition permit
Building Commission
Form – application
14 May 2014
Application to extend time – occupancy permit or building approval certificate
Building Commission
Form – application
14 May 2014
Edgers are used in most workplaces that have lawns and employ gardeners. Edgers can be used for long periods of time and can exceed 85 dB(A). Hearing protection is required for operators of edgers...
WorkSafe
Fact sheet
14 May 2014
Brushcutters are widely used by gardeners. They vary in size, power and quality. Some lightweight units are common around schools and parks. Heavy-duty powerful units are used by some specialists...
WorkSafe
Fact sheet
14 May 2014
Demonstration engines used in training situations consist of an automobile engine mounted in a frame complete with an ignition system, fuel lines, radiator and associated piping, exhaust system and...
WorkSafe
Fact sheet
14 May 2014
The noise levels of bench and pedestal grinders vary with the type of work being performed on the tool. Larger pieces of metal such as 50 mm angle iron will produce much more noise (typically 105 dB(...
WorkSafe
Fact sheet
14 May 2014
Building Commission
Form – application
14 May 2014
Building Commission
Form – application
14 May 2014
Electric drills vary in noise output according to type. Hammer drills produce the highest noise levels because of their impact function. The quality and method of construction of the drill also...
WorkSafe
Fact sheet
14 May 2014
Angle grinders are used extensively in the metalworking and panel beating areas and can be used for wood carving when equipped with an "Arbortech" woodcarving disc. Other accessories such as...
WorkSafe
Fact sheet
14 May 2014
Hand held belt sanders range in noise level from 92 to 103 dB(A). The noise levels are directly affected by the quality and condition of the tool. The free running noise level of a belt sander is...
WorkSafe
Fact sheet
14 May 2014
Orbital sanders range in noise level quite dramatically, the quietest currently being the Festo and ELU brands (80-82 dB(A)). The noise levels are directly affected by the quality and condition of...
WorkSafe
Fact sheet
14 May 2014
This educational article has been developed to assist in the identification of occupational safety and health (OSH) hazards. The hazard identification tools were developed following interviews with...
WorkSafe
Fact sheet
13 May 2014
A report into the wild fire that occurred at Location 745 Bates Road, Dalyup, about 20 km west of Esperance, on Thursday 2 December 2005.
EnergySafety
Reports
12 May 2014
This application form is used to apply for a ground geophysical survey equipment permit.
EnergySafety
Form – application
05 May 2014
This application form is used to apply for a mobile mining permit.
EnergySafety
Form – application
05 May 2014
This application form is used to restore a name to the Electrical Licensing Register.
EnergySafety
Form – application
05 May 2014
This form is used to notify Energy Safety of a change of name to an electrical worker's licence, permit, or certificate of registration and obtain an updated licence card.
EnergySafety
Form – application
05 May 2014
Notice of termination by park operator or tenant agreement frustrated Form 2011
Consumer Protection
Form – notification
04 May 2014
Residential Parks condition report site only agreement
Consumer Protection
Reports
04 May 2014
This is what an electrical safety certificate looks like. You should receive one from your electrical contractor within 28 days of the electrical work (other than repairs) being done.
EnergySafety
Information
02 May 2014
This advisory letter is issued by the electrical contractor or electrician to the owner or occupier to inform them that unenclosed joints were found and remedial work is to be carried out.
EnergySafety
Advisory note
02 May 2014
This publication will assist event organisers, venue organisers, asset managers and catering vendors to comply with the safety requirements for the use of gas appliances in public venues.
EnergySafety
Brochure
30 Apr 2014

Pages