Publications

Showing 1 - 25 of 130 results
The Community expects the electrical appliances they use to be safe. This fact sheet summarises electrical safety laws for importing, selling or hiring out electrical appliances and equipment in...
EnergySafety
Fact sheet
08 Feb 2019
Make sure you use a licensed gas fitter whenever you have gasfitting work done. Is your gasfitter licensed? Make sure you use a licensed gas fitter whenever you have gasfitting work done. In Western...
EnergySafety
Brochure
08 Feb 2019
This form is used to notify the department of a lost or stolen electrical worker's licence, permit or certificate of registration and to apply for a replacement.
EnergySafety
Form – application
07 Feb 2019
This application form is used when you intend to carry out electrical installing work for yourself or immediate family.
EnergySafety
Form – application
01 Feb 2019
This application form is used to register as a management representative for an electrical contractor's licence.
EnergySafety
Form – application
31 Jan 2019
This application form is where the existing legal entity has not changed and the trading name has changed or, the existing legal entity has changed its name and is maintaining the same Australian Company Number (ACN).
EnergySafety
Form – application
31 Jan 2019
Explanatory notes Purpose of this document This document details the application and renewal processes for the designation of Inspectors (Electricity) in Western Australia. It also sets out the...
EnergySafety
Guide / handbook
29 Jan 2019
For gas operatives and industry representative who wish to view the existing interpretations or request an interpretation of a specific code or standard requirement.
EnergySafety
Technical standards
21 Jan 2019
When was the last time you checked your LP gas installation? Follow this simple checklist to see if your marine craft is safe and complies with the regulations.
EnergySafety
Brochure
21 Jan 2019
The purpose of this document is to clarify the responsibilities for controlling and clearing vegetation around overhead power lines.
EnergySafety
Guide / handbook
21 Jan 2019
Serious incidents have occurred while workers have been carrying out vegetation control work.
EnergySafety
Brochure
21 Jan 2019
Business plans for the Energy Safety division of the Department of Mines Industry Regulation and Safety.
EnergySafety
Plans
21 Jan 2019
The following steps are recommended if you wish to appeal against an Inspector's Order issued to you by an Inspector (Electricity). Step one Contact the issuing inspector to clarify the issue...
EnergySafety
Information
21 Jan 2019
Building and Energy, in conjunction with WorkSafe, has published new guidelines for safe management of high voltage electrical installations.
EnergySafety
Technical standards
21 Jan 2019
This document aims to assist people designated or applying to be designated as an Inspector (Electricity). It provides information on the categories of designation, the power and limitations of an Inspector (Electricity) under the Energy Coordination Act 1994 , and the standard of conduct that an Inspector (Electricity) is expected to maintain when carrying out their duties.
EnergySafety
Code of practice
21 Jan 2019
This document aims to assist people designated or planning to be designated as an inspector (gas). It provides information on the designation; the powers and limitations of an inspector (gas) under the Energy Coordination Act 1994; and the principles and practices that an inspector (gas) is expected to follow when carrying out their duties.
EnergySafety
Code of practice
21 Jan 2019
New WAER 2015 for installation designs commenced after 1 January 2016.
EnergySafety
Technical standards
21 Jan 2019
These guidelines have been developed and issued by the Director of Energy Safety, Building and Energy Division of the Department of Mines, Industry Regulation and Safety Western Australia.
EnergySafety
Guide / handbook
15 Jan 2019
Battery Energy Storage Systems (BESS) are being installed in increasing numbers in electricity distribution networks, homes, remote area power supplies and commercial/industrial installations...
EnergySafety
Guide / handbook
15 Jan 2019
General It is a requirement of Regulation 45(1) of the Electricity (Licensing) Regulations 1991 that an electrical contractor shall ensure that his/her electrical contractor’s licence number appears...
EnergySafety
Information
15 Jan 2019
This application form is used to advise Building and Energy of a lost or stolen gasfitting permit or gasfitting authorisation and apply for a replacement card.
EnergySafety
Form – application
15 Jan 2019
This application form is used to notify Building and Energy of a change of name to your gasfitting permit or gasfitting authorisation.
EnergySafety
Form – application
15 Jan 2019
This application form is used to apply for a Class P gasfitting permit.
EnergySafety
Form – application
11 Jan 2019
This application form is used to apply for a Class E gasfitting permit.
EnergySafety
Form – application
09 Jan 2019
This application form is suitable for a person who wishes to upgrade an Installing NG and LPG permit to include as servicing, or to upgrade a Gas Servicing Only permit to include installing NG and...
EnergySafety
Form – application
09 Jan 2019

Pages