This code applies to all workplaces in Western Australia covered by the Occupational Safety and Health Act 1984 and provides practical guidance for commercial vehicle drivers, and for those who are responsible for the operation of commercial vehicles in workplaces, on carrying out their duties under the Occupational Safety and Health Act 1984 and meeting the requirements of the Occupational Safety and Health Regulations 1996.

Disclaimer – The information contained in this guide is provided as general information only. It should not be relied upon as legal advice or as an accurate statement of the relevant legislation...

The Work Health and Safety Excellence Awards will be held at the State Reception Centre on 28 October 2022 . Find out about the finalists in this prestigious event in the Work Health and Safety...

This Ready reckoner may be used to work out the total L Aeq,8h for combinations of noise levels and exposure duration for each work activity and the relative importance of each. Appendix 4 of the...

It has come to the attention of WorkSafe that there are potentially several hundred flying foxes in operation across Western Australia. A flying fox is an amusement device consisting of an elevated...

WorkSafe Mines Safety has received a number of notifications reporting potentially serious incidents involving breakthroughs into areas or headings that have not been barricaded. Recent incidents...

Alloy lifting chains and associated components (such as hooks, shackles and links) are used widely across a variety of industries and environments to lift and move loads. There are a number of forms...

This code of practice provides practical guidance on how to effectively consult with workers who carry out work for the business or undertaking and who are (or are likely to be) directly affected by...

This document clarifies the requirements to advise the regulator under the WHS legislation the following information is provided. The Work Health and Safety Act 2020 (WHS Act) and Work Health and...

The Psychosocial hazards in the workplace code of practice focuses on the general principles applied to the prevention and management of psychosocial hazards in the workplace. The intent of this code...

Use this poster to promote your health and safety representatives

The mine safety management system (MSMS) for a mine must contain a level of detail that is appropriate to the mine having regard to the nature, complexity and location of the mining operations, and...