Publications

Showing 26 - 50 of 2661 results
To be issued a Gasfitting Permit in Western Australia, a person must be able to demonstrate various requirements to the Director of Energy Safety, one of which includes demonstrating practical skills...
Building and Energy
Information
24 Nov 2022
Application to upgrade a tradespersons permit to a Class G gasfitting permit (suitable for applicants who have successfully completed the on-the-job training record book).
Building and Energy
Form – application
24 Nov 2022
This application form is suitable for a person who wishes to upgrade an Installing NG and LPG permit to include as servicing, or to upgrade a Gas Servicing Only permit to include installing NG and...
Building and Energy
Form – application
24 Nov 2022
This form is suitable for a Western Australian indentured apprentice or a non-apprentice (trainee) or tradesperson working under supervision.
Building and Energy
Form – notification
24 Nov 2022
This application form is suitable for a Western Australian indentured apprentice or non-apprentice (trainee) who has completed either a plumbing apprenticeship or a Certificate III in gasfitting plus...
Building and Energy
Form – application
24 Nov 2022
This application form is suitable for a Western Australian indentured apprentice or a non-apprentice (trainee) who has not completed either the on-the-job training and/or Toolbox session. To be...
Building and Energy
Form – application
24 Nov 2022
This application from is suitable for a Western Australian indentured apprentice or a non-apprentice (trainee) wishing to work under direct supervision. To be issued a Gasfitting Permit in Western...
Building and Energy
Form – application
24 Nov 2022
Building and Energy
Form – application
24 Nov 2022
Complete this form to renew your Plumbing licence/permit.
Building and Energy
Form – application
24 Nov 2022
Building and Energy
Form – application
24 Nov 2022
Building and Energy
Form – application
24 Nov 2022
Complete this form to apply to the Plumbers Licensing Board for a Plumbing tradeperson's licence.
Building and Energy
Form – application
24 Nov 2022
Complete this form to apply to the Plumbers Licensing Board for a Plumbing contractor licence.
Building and Energy
Form – application
24 Nov 2022
This code of practice applies to all workplaces in Western Australia covered by the Occupational Safety and Health Act 1984 and provides guidance on occupational safety and health management in call centres. The practical guidance in this code of practice should be considered in conjunction with the general duties in the Occupational Safety and Health Act 1984.
WorkSafe
Code of practice
23 Nov 2022
This code of practice applies to all workplaces in Western Australia covered by either the OSH Act or the MSI Act and provides general guidance for employers, people in control of workplaces, designers, manufacturers, suppliers and workers on the identification and control of safety and health hazards and risks associated with Legionnaires’ disease; and information on key legislative requirements in the OSH Act, the OSH Regulations, the MSI Act and the MSI Regulations as they relate to Legionnaires’ disease.
WorkSafe
Code of practice
23 Nov 2022
This code of practice provides general guidance for all commercial fishing industry vessels in WA on the management of occupational safety and health issues relevant to the prevention of and response to man overboard incidents. While there are systems of work considerations in relation to eliminating and reducing the risks, this code's focus is on general safety and health issues relevant to man overboard events. Users of this code will need to look at their operation and its level of risk in relation to man overboard, as this code does not deal with every situation that may be found on commercial fishing vessels. Capability, operations, situations, equipment, machinery and tasks vary and hazards and risks not referred to in this code may arise requiring controls other than those recommended in this code.
WorkSafe
Code of practice
23 Nov 2022
The National Code of Practice for Precast, Tilt-up and Concrete Elements in Building Construction provides practical guidance on ways to eliminate hazards and/or minimise risks in the safe handling of concrete elements in building construction.
WorkSafe
Code of practice
23 Nov 2022
The purpose of this National Code of Practice for the Control of Scheduled Carcinogenic Substances [NOHSC:2014(1995)] is to provide practical guidance on how to comply with the prohibition and notification requirements for scheduled carcinogenic substances. It also explains the specific requirements for assessment and control of risks arising from work with scheduled carcinogenic substances, and the specific requirements for record keeping.
WorkSafe
Code of practice
23 Nov 2022
This code of practice addresses issues that might potentially arise in some working hours arrangements, for example extended hours, shift work and on call work. It brings together a range of recognised workplace hazard factors that must already be addressed, as far as practicable, where there are occupational safety and health risks. This code of practice is presented as a starting point for undertaking a workplace or industry risk management process to address relevant issues where the working hours arrangements may have occupational safety and health considerations. As individual workplaces and industries have different working hours arrangements, this code of practice provides high level general guidance and recommendations on risk management. It is suggested that the risk management approach is tailored specific to the unique demands of each workplace and/or industry
WorkSafe
Code of practice
23 Nov 2022
This code of practice applies to venues, where employees or the self-employed are present, where live (whether amplified or not) or recorded music is being played for entertainment purposes at levels which are likely to exceed the exposure standard for noise.
WorkSafe
Code of practice
23 Nov 2022
This code of practice aims to provide practical guidance for public sector agencies to achieve compliance with the obligations of the Occupational Safety and Health Act 1984 and the Occupational Safety and Health Regulations 1996. This code also promotes the role of occupational safety and health (OSH) management systems and the importance of chief executive officer leadership in improving OSH performance. It acknowledges that an effective OSH management system is a critical component of an agency’s overall risk management program.
WorkSafe
Code of practice
23 Nov 2022
The Ferry and Charter Boat Industry Code of Practice (the Code), provides practical guidance on the safe operation of commercial vessels operating in the ferry and charter boat industry in Western Australia. It is designed to assist those working in the industry to identify, assess and control risks to themselves, colleagues and passengers.
WorkSafe
Code of practice
23 Nov 2022
This code of practice applies to all workplaces in Western Australia covered by the Occupational Safety and Health Act 1984 where concrete and masonry cutting and drilling equipment is used.
WorkSafe
Code of practice
23 Nov 2022
Transition arrangements allow for codes of practice approved under the Occupational Safety and Health Act 1984 and Mines Safety and Inspection Act 1994 to continue being in effect as if approved by...
WorkSafe
Code of practice
23 Nov 2022

Pages