Angle grinders are used extensively in the metalworking and panel beating areas and can be used for wood carving when equipped with an "Arbortech" woodcarving disc. Other accessories such as...
Hand held belt sanders range in noise level from 92 to 103 dB(A). The noise levels are directly affected by the quality and condition of the tool. The free running noise level of a belt sander is...
Orbital sanders range in noise level quite dramatically, the quietest currently being the Festo and ELU brands (80-82 dB(A)). The noise levels are directly affected by the quality and condition of...
This educational article has been developed to assist in the identification of occupational safety and health (OSH) hazards. The hazard identification tools were developed following interviews with...
This is what an electrical safety certificate looks like. You should receive one from your electrical contractor within 28 days of the electrical work (other than repairs) being done.
A guide for the safe operation of an LP gas powered vehicle. Auto LP Gas safety Just like other forms of energy, LP gas (liquefied petroleum gas) is safe when treated properly. A correctly installed...
A wild fire occurred at Location 1434, South Coast Highway, about 42 km west of Esperance, on 15 December 2004. Energy Safety carried out an investigation into the cause of the fire and determined...
A wild fire occurred at Lot 2 Location 1039, Moonup Road, about 40 km west of Esperance, on Tuesday 14 December 2004. Energy Safety carried out an investigation into the cause of the fire and...
A wild fire occurred at Location 1482 South Coast Highway, about 72 km west of Esperance, on Friday 10 December 2004. Energy Safety carried out an investigation into the cause of the fire and...
Energy Safety carried out an investigation into the fire and could not determine the cause. The fire originated in the area of a network operator's power pole. However, there was no evidence of...
Energy Safety carried out an investigation into the cause of the fire in Dunsborough. It was determined that the cause of the fire was a leakage current due to dust or salt spray on the insulators,...
Energy Safety carried out an investigation into the cause of the fire near Breakwater Drive, Two Rocks Western Australia on 16 January 2009. It was determined that the fire occurred w hen two 22 kV...
A wild fire occurred near Chatcup Road on 3 February 2007. Energy Safety carried out an investigation into the cause of the fire and determined that the fire started when a 22 kV conductor clashed...
Energy Safety carried out an investigation into the cause of the fire at Balingup and determined that the cause of the fire was a fallen pole which ignited the dry grass and vegetation.
A guide for property owners, real estate agents and operators of residential parks about lodging tenants’ security bonds with the Department’s Bond Administration Section