Employee / worker

Publications

This guidance note applies to all workplaces in Western Australia covered by the Occupational Safety and Health Act 1984 (OSH Act) and provides guidance on occupational safety and health management...
WorkSafe
Guidance note
31 Mar 2016
The purpose of this code of practice is to provide advice on the preparation of Material Safety Data Sheets (MSDS) where required by legislation. The aim is to provide consistent health and safety advice to persons who could be exposed to hazardous substances and Dangerous Goods.
WorkSafe
Code of practice
21 May 2014
This guidance note has been developed to provide laboratories and analysts with a consistent methodology for the sampling and analysis of airborne asbestos fibres in workplaces.
WorkSafe
Guidance note
20 May 2014
This guidance note provides detailed practical guidance to persons performing health risk assessments.
WorkSafe
Guidance note
20 May 2014
The purpose of this national code of practice is to provide practical guidance in the identification of health hazards, evaluation of risks and control of exposure associated with the manufacture of vinyl chloride and its subsequent polymerisation to polyvinyl chloride (PVC). Note that vinyl chloride is often referred to as vinyl chloride monomer (VCM).
WorkSafe
Code of practice
21 May 2014
The purpose of this National Code of Practice for the Safe Use of Synthetic Mineral Fibres is to provide a safe and healthy workplace by outlining safe work practices and general responsibilities when handling synthetic mineral fibres (SMF).
WorkSafe
Code of practice
21 May 2014
This national code of practice provides a basis for the reduction or elimination of risks arising out of the use and handling of ethylene oxide in sterilisation/fumigation processes in hospitals, museums, libraries and industry.
WorkSafe
Code of practice
21 May 2014
This national code of practice has been developed to assist persons with control of premises and/or plant to control the risks of asbestos-containing materials (ACM) in workplaces. It sets out the steps to be taken to eliminate or otherwise minimise the risks of exposure to airborne asbestos fibres, including the identification of ACM, risk assessments and the implementation of control measures. The objective of these measures is to prevent workplace exposure to airborne asbestos fibres and thereby reduce the incidence of asbestos-related diseases such as mesothelioma, asbestosis and lung cancer.
WorkSafe
Code of practice
21 May 2014
The purpose of this code of practice is to provide advice for the safe removal of asbestos and asbestos-containing materials (ACM) from buildings and structures, plant and equipment, and vehicles.
WorkSafe
Code of practice
21 May 2014
The aim of this National Code of Practice for the Labelling of Workplace Substances [NOHSC:2012(1994)] is to provide practical guidance on meeting the requirements for the labelling of hazardous substances used at work under the National Model Regulations for the Control of workplace hazardous substances [NOHSC:1005(1994)] and the Commonwealth, State and Territory regulations introduced in accordance with these national model regulations.
WorkSafe
Code of practice
21 May 2014

Pages

Subscribe to RSS - Employee / worker