Gas worker

Topics

Gas Standards (Gas Supply and System Safety) Regulations 2000 The Gas Standards (Gas Supply and System Safety) Regulations 2000 were came into effect on 1 August 2000. The regulations mandate the following standards: AS 2885.1 "Pipelines - Gas and liquid petroleum - Design and construction" AS 2885...
Gas networks
The risks associated with an unsafe installation are high, so the work must be restricted to competent (licensed) workers. To emphasise the nature of the hazard, these installations can appear to operate well yet be unsafe. For example, a gas installation could seemingly operate satisfactorily...
Forms
<h3>License Search Form</h3> <p>If the search form has not loaded here, please follow <a data-cke-saved-href=&quot; https://occupationallicensing.dmirs.wa.gov.au/onlinelicencesearch/licenc... href=&quot; https://occupationallicensing.dmirs.wa.gov.au/onlinelicencesearch/...
Licensing search
Gas fitter's responsibilities It is the gas fitter's responsibility to ensure that all gasfitting work carried out by him/her complies with legislation. The gas fitter must carry out the work to the requirements of the Gas Standards (Gasfitting and Consumer Gas Installations) Regulations 1999 and...
Gas installations
All fuel gas accidents or incidents that occur in Western Australia should be reported. Gas incidents Regulation 42 of the Gas Standards (Gasfitting and Consumer Gas Installations) Regulations 1999 requires that all incidents, such as near misses, injury to persons or property damage relating to...
Reporting a gas incident
A consumer shall not use a Type B gas appliance in Western Australia unless the gas appliance is approved by the Director of Energy Safety, and is marked, stamped or labelled in the manner approved by the Director. Type B appliances are large commercial and industrial gas appliances. A Type B...
Appliance and equipment approval
What is a Type A gas appliance? Type A appliances are domestic and commercial gas appliances of a type identified in regulation 42B of the Gas Standards (Gasfitting and Consumer Gas Installations) Regulations 1999 . This includes: Domestic cooking appliances. Domestic space heating appliances...
Appliance and equipment approval
Renewal Renewal reminder notices are now sent by email only. Visit the renewal reminder notices page for further information. For quicker processing, pay to renew your gasfitting permit using the department's online renewal system. To use the online system you will need to know your permit number (...
Services
To achieve Building and Energy's regulatory objectives, the Director and staff administer a wide suite of legislation: Energy Safety Act 2006 Energy Safety Regulations 2006 Energy Safety Levy Act 2006 Energy Coordination Act 1994 (major parts) Energy Coordination (General) Regulations 1995...
Legislation administered
On 22 January 2018, the Building and Energy Division was formed from the amalgamation of the Building Commission and Energy Safety . Building and Energy oversees the operations of the building, building surveying, electrical, gas, painting, and plumbing industries including the resolution of...
About Building and Energy

Pages

Publications

The Department of Commerce – WorkSafe Division has released a Discussion Paper on recommendations to amend the model Work Health and Safety Regulations (the WHS regulations) for the Western...
WorkSafe
Information
01 Jun 2016
This application form is suitable for a person who wishes to upgrade an Installing NG and LPG permit to include as servicing, or to upgrade a Gas Servicing Only permit to include installing NG and...
Building and Energy
Form – application
24 Nov 2022
Important points about LP Gas cylinders, and a list of Standards Australia certified gas cylinder test stations in Western Australia.
Building and Energy
Information
19 Jul 2019
When was the last time you checked your LP Gas installation to ensure it was safe and complies?
Brochure
30 May 2014
The Energy Bulletin has been replaced with the Energy and Plumbing Focus newsletter. The Energy and Plumbing Focus newsletter brings you the latest news for the electrical, gas and plumbing...
Building and Energy
Bulletin
15 Jan 2020
For gas operatives and industry representative who wish to view the existing interpretations or request an interpretation of a specific code or standard requirement.
Building and Energy
Technical standards
19 Jul 2019
Generic or global variation or exemptions for domestic, commercial or mobile engine installations.
Building and Energy
Register
19 Jul 2019
These guidelines have been developed and issued by the Director of Energy Safety, Building and Energy Division of the Department of Mines, Industry Regulation and Safety Western Australia.
Building and Energy
Guide / handbook
04 Dec 2023
This document aims to assist people designated or planning to be designated as an inspector (gas). It provides information on the designation; the powers and limitations of an inspector (gas) under the Energy Coordination Act 1994; and the principles and practices that an inspector (gas) is expected to follow when carrying out their duties.
Building and Energy
Code of practice
27 Oct 2023
This application form is used to notify Building and Energy of a change of name to your gasfitting permit or gasfitting authorisation.
Building and Energy
Form – application
19 Jul 2019

Pages

Subscribe to RSS - Gas worker