Publications

Showing 2826 - 2850 of 2893 results
A list of minutes from the meetings of the Commission for Occupational Safety and Health .
WorkSafe
Minutes
03 May 2024
Use this form to make a new application for a licence to remove non-friable asbestos. How to submit your application for a Class B asbestos removal licence Once you have completed the application...
WorkSafe
Form – application
21 Mar 2024
A provisional improvement notice (PIN) is a notice issued by an elected and qualified health and safety representative about a health and safety issue in the workplace.
WorkSafe
Information
11 Apr 2022
Use this form to apply to the regulator for an exemption from complying with a requirement of the Work Health and Safety legislation
WorkSafe
Form – application
06 Apr 2022
If you wish to submit a review of a prohibition notice to the WorkSafe Western Australia Commissioner you will need to complete a reference of prohibition notice for review form.
WorkSafe
Form – application
21 May 2014
The preferred lodgement method for Form 200 submissions is through the online form. Step 1 Download and complete the PDF form: Form 200 - Registration of plant design or alteration to plant design...
WorkSafe
Form – registration
04 Dec 2023
This health surveillance notification form for o rganophosphate should be used by an appointed medical practitioner to notify WorkSafe.
WorkSafe
Form – notification
21 May 2014
This health monitoring notification form for lead should be used by a registered medical practitioner to notify WorkSafe.
WorkSafe
Form – notification
21 Feb 2024
This health monitoring notification form for isocyanates should be used by an appointed medical practitioner to notify WorkSafe.
WorkSafe
Form – notification
21 Feb 2024
This health monitoring notification form for asbestos should be used by an registered medical practitioner to notify WorkSafe.
WorkSafe
Form – notification
21 Feb 2024
If you wish to apply to transfer an interstate high risk work licence, you will be required to submit this form.
WorkSafe
Form – application
07 May 2024
Use this form to notify the regulator of proposed Class 1 or 2 demolition work.
WorkSafe
Form – notification
08 Apr 2022
An intention of notifcation to manufacture concrete panels notification must be advised to the WorkSafe Commissioner at least 10 working days before the first panel is to be cast; this includes...
WorkSafe
Form – notification
06 Sep 2022
This document sets out the procedure for applying for a demolition licence and criteria used in assessing an application.
WorkSafe
Form – application
22 May 2014
This publication provides information on employer-employee agreements, which are formal registered agreements between employers and employees in the state system.
Labour Relations
Guide / handbook
29 Jun 2017
This guidance note explains the occupational safety and health laws that apply to the operation of forklifts in Western Australia and covers the general requirements in the Occupational Safety and...
WorkSafe
Guidance note
20 May 2014
This guidance note provides guidance for employers and workers on the management of safety and health hazards and risks that may arise in relation to working alone. On 31 March 2022, the Work Health...
WorkSafe
Guidance note
30 Aug 2023
This guidance note provides important information for the safety and health of those who operate, clean, repair or maintain woodworking machinery.
WorkSafe
Guidance note
20 May 2014
People involved in the manufacture, repair or restoration of furniture and other wood products, or in the building industry, may be exposed to hazardous chemicals. This guidance note is one of three...
WorkSafe
Guidance note
05 Jun 2014
This guidance note provides information and assistance on the safe movement of vehicles and mobile plant in workplaces.
WorkSafe
Guidance note
20 May 2014
This guidance note applies to workplaces in Western Australia covered by the Occupational Safety and Health Act 1984 and provides information on key issues relating to the control of infectious...
WorkSafe
Guidance note
20 May 2014
This guidance note provides information for workers on identifying and eliminating or managing carbon monoxide hazards in Western Australia workplaces and sets out good practice that will assist in...
WorkSafe
Guidance note
20 May 2014
This guidance note applies to all workplaces in Western Australia covered by the Occupational Safety and Health Act 1984 and provides guidance on preparing for emergency evacuations at the workplace...
WorkSafe
Guidance note
20 May 2014
This guidance note has been issued by the Commission for Occupational Safety and Health and provides guidance to people at work and in control of workplaces for developing safe isolation procedures...
WorkSafe
Guidance note
20 May 2014
This guidance note provides advice and information on the correct use of flashback arresters to minimise the risk of injury to workers and damage to equipment if flashback occurs.
WorkSafe
Guidance note
20 May 2014

Pages