Tradesperson

Topics

When a consumer suffers loss or damage due to a defect with goods or services, they can make a claim to recover damages or compensation. This is particularly the case where the defect means the trader or manufacturer failed to comply with a consumer guarantee. A consumer can apply to the trader or...
Returns and cancellations
The Gas Licensing Committee was formed by the Director of Energy Safety to consider matters with regard to licenses issued under the Gas Standards (Gasfitting and Consumer Gas Installations) Regulations 1999. The committee's primary function is to advise the Director on the competence of applicants...
Forms
The risks associated with an unsafe installation are high, so the work must be restricted to competent (licensed) workers. To emphasise the nature of the hazard, these installations can appear to operate well yet be unsafe. For example, a gas installation could seemingly operate satisfactorily...
Forms
<a data-cke-saved-href=" http://www.commerce.wa.gov.au/CALS_Online/licenceSearch.jspx?BranchGroup... href=" http://www.commerce.wa.gov.au/CALS_Online/licenceSearch.jspx?BranchGroup... title=&amp...
Licensing search
Gas fitter's responsibilities It is the gas fitter's responsibility to ensure that all gasfitting work carried out by him/her complies with legislation. The gas fitter must carry out the work to the requirements of the Gas Standards (Gasfitting and Consumer Gas Installations) Regulations 1999 and...
Gas installations
All fuel gas accidents or incidents that occur in Western Australia should be reported. Gas incidents Regulation 42 of the Gas Standards (Gasfitting and Consumer Gas Installations) Regulations 1999 requires that all incidents, such as near misses, injury to persons or property damage relating to...
Reporting a gas incident
Gas appliances A person shall not sell or hire any gas appliance or advertise any gas appliance for sale or hire in Western Australia unless the gas appliance is approved by the Director of Energy Safety, and is marked, stamped or labelled in the manner approved by the Director. Type B appliances...
Appliance and equipment approval
Gas appliances A person shall not sell or hire any gas appliance or advertise any gas appliance for sale or hire in Western Australia unless the gas appliance is approved by the Director of Energy Safety, and is marked, stamped or labelled in the manner approved by the Director. Type A gas...
Appliance and equipment approval
The community expects that the electrical and gas appliances they use are safe. Legislation requires retailers to ensure that most domestic appliances sold comply with appropriate Australian safety standards. The Electricity Act and Regulations In Western Australia, electrical safety legislation...
Appliance and equipment approvals
The Electrical Licensing Board is constituted under provisions of the Electricity (Licensing) Regulations 1991. Its primary function is to determine the competence of applicants for, and holders of, electrical licences and permits issued under the licensing regulations. The board represents the...
Forms

Pages

Publications

This application form is used to notify Energy Safety of a change of name to your gasfitting permit or gasfitting authorisation.
EnergySafety
Form – application
02 May 2014
This application form is used to apply to restore your name to the gasfitting licensing register.
EnergySafety
Form – application
02 May 2014
This application form is used to convert your certificate of compentency to a gasfitting permit. Fact sheet - gasfitting certificate of competency to permit This fact sheet explains what your...
EnergySafety
Form – application
30 Nov 2017
This application form is used to advise Energy Safety of a lost or stolen gasfitting permit or gasfitting authorisation and apply for a replacement card.
EnergySafety
Form – application
02 May 2014
This application form is used to apply for a gasfitting authorisation.
EnergySafety
Form – application
30 Nov 2017
This application form is used to apply for a gasfitting permit for interstate or New Zealand applicants under mutual recognition.
EnergySafety
Form – application
23 Jan 2017
This application form is used to apply for a Class E gasfitting permit.
EnergySafety
Form – application
01 Sep 2017
This application form is used to apply for a Class I gasfitting permit.
EnergySafety
Form – application
01 Sep 2017
This application form is used to apply for a Class P gasfitting permit.
EnergySafety
Form – application
01 Sep 2017
This application form is used to apply for a Class G gasfitting permit for installing NG and LPG or installing and servicing NG and LPG
EnergySafety
Form – application
23 Jan 2017

Pages

Announcements

Building company Pacific Modular Pty Ltd (reg. BC14434) has been fined $3,500 by the Building Services Board for negligent conduct relating to building work it carried out without a valid building permit at a South Hedland property in 2014.
Building Commission
Media release
21 Nov 2016
Kalbarri man Peter John Barry Ikin , trading as Cape York Connections , has been successfully prosecuted by the Building Commissioner for carrying out unregistered painting work at eight Mid West properties between December 2013 and June 2015.
Building Commission
Media release
14 Nov 2016
The best way to ensure quality painting and plumbing work, and to make sure only ‘fit and proper’ persons are entering your client’s homes and places of business, is to engage appropriately registered and licensed tradespersons. Painters’ registration requirements Individuals, partnerships and companies that contract with others to provide painting services valued over $1,000 must be registered...
Building Commission
Department News
01 Nov 2016
The Building Commission is strongly advising home owners against carrying out their own plaster testing. The advice follows recent media reports and social media posts suggesting the use of a tape adhesion or “sticky tape” test to determine whether plaster has been correctly applied. Home owners are warned that testing their own walls could damage the plaster or paint. Tests should only be...
Building Commission
Department News
25 Oct 2016
Francesco Di Labio (reg. BP7903 – expired), as the nominated supervisor of Dianella building company Frayson Pty Ltd (BC8331 – cancelled), has been ordered by the State Administrative Tribunal (SAT) to pay a fine of $15,000 and costs of $1,000 as a result of disciplinary action by the Building Services Board.
Building Commission
Media release
24 Oct 2016
Western Australia's home building industry and new home owners are continuing to enjoy savings, as more outdated requirements are removed from the State's building regulations.
Building Commission
Media release
13 Oct 2016
With Acting Commissioner for Consumer Protection David Hillyard Watching The Block might have inspired you to get cracking on some home renovations but unlike the TV show contestants you won’t have access to host Scotty’s ‘black book of trades’. So, how do you go about finding trustworthy, reliable tradespeople who’ll do a good job for the right price? We’ve got some tips to help you avoid tradie...
Consumer Protection
Department News
27 Sep 2016
The Liberal National Government today introduced legislation into State Parliament to protect payments to subcontractors in the construction industry.
Building Commission
Department News
22 Sep 2016
The 2016-17 financial year sees the Australian Building Codes Board embarking on a significant suite of work relating to the advancement of the Energy Efficiency Provisions in the National Construction Code (NCC). These changes will be considered as part of NCC 2019.
Building Commission
Department News
21 Sep 2016
Waterman’s Bay licensed plumbing tradesperson Gary Clayton Hummerston (TL11472) has been successfully prosecuted by the Plumbers Licensing Board (PLB) for failing to comply with a condition of his licence.
Building Commission
Media release
14 Sep 2016

Pages

Subscribe to Topics
Subscribe to RSS - Tradesperson