This guidance note applies to all workplaces in Western Australia covered by the Occupational Safety and Health Act 1984 (OSH Act) and provides guidance for employers and workers on alcohol and other...

This guidance note applies to all workplaces in Western Australia covered by the Occupational Safety and Health Act 1984 (OSH Act) and provides guidance on occupational safety and health management...

If you’re thinking about purchasing a new or used car, there are a few things you should consider first, before you drive away with your new set of wheels. ☑ Decide if you are going to buy a new or...

In Western Australia, a residential park is a place that provides land ‘sites’ for rent, usually for a relocatable home, such as a caravan or park home. The tenant can either rent or purchase a home...

This guidance note has been developed to provide laboratories and analysts with a consistent methodology for the sampling and analysis of airborne asbestos fibres in workplaces.

The purpose of this national code of practice is to provide practical guidance in the identification of health hazards, evaluation of risks and control of exposure associated with the manufacture of vinyl chloride and its subsequent polymerisation to polyvinyl chloride (PVC). Note that vinyl chloride is often referred to as vinyl chloride monomer (VCM).

This national code of practice provides a basis for the reduction or elimination of risks arising out of the use and handling of ethylene oxide in sterilisation/fumigation processes in hospitals, museums, libraries and industry.

The purpose of this National Code of Practice for the Control of Scheduled Carcinogenic Substances [NOHSC:2014(1995)] is to provide practical guidance on how to comply with the prohibition and notification requirements for scheduled carcinogenic substances. It also explains the specific requirements for assessment and control of risks arising from work with scheduled carcinogenic substances, and the specific requirements for record keeping.

This national code of practice provides a practical guide on how to comply with the National Standard for the Control of Inorganic Lead at Work [NOHSC:1012(1994)] so as to minimise risk of disease and injury due to exposure to lead in the workplace. It can be used to develop specific workplace programs for the control of exposure to inorganic lead.

The National Code of Practice for Precast, Tilt-up and Concrete Elements in Building Construction provides practical guidance on ways to eliminate hazards and/or minimise risks in the safe handling of concrete elements in building construction.